| Design |
|
There are many design choices, here are 4 popular types |
| Freestanding Open Fireplace |
|
This fireplace is a Jetmaster Open Fireplace with hebel block surrounding it completely.It is then cladded in a fibro & painted. |
| Rear outlet |
|
Rear outlet design flue kits , come off the back of the heater, through the wall & then with installation of a tee piece proceeds vertically. |
| Two faced open fireplace |
|
This two faced open fireplace is constructed from 6mm weathering steel firebox.Sandstone cladded with vent gaps in the sandstone to allow for heat output from the convection duct built into the firebox just below the ceiling line |
| Jotul 80 |
|
This fireplace was created on a blank wall with tapered sides . |
| Jotul on a blank wall |
|
This Jotul18 was installed by strengthing the sub floor and building a hebel enclousure around the Jotul 18 to suit the client's design and position in the house. Once the hebel enclosure is completed the fireplace is then cladded ready for painting. |
| Pentagon Gas inbuilt |
|
Rinnai Royale inbuilt installed in a pentagon shape This was created to suit a narrow wall it was backing on to with high volume walk ways each side of it and in front, without feeling like it was impeding the room but taking advantage of an unused wall. Installed and cladded ready for painting. |
| Jotul 18 |
|
A Corner installation of a inbuilt Jotul 18 against a gyprock wall.Completly lined with hebel block protecting all combustible walls to the register height. |
| Open Fireplace created against a Gyprock wall |
|
The position of the fireplace is important in regards to roof timbers and valleys etc. Once confirmed the Jetmaster is installed, Hebel block is laid to protect the surrounding walls and then cladded to create the illusion of a complete chimney breast. |
| Sandstone Face |
|
Complete sandstone face with Chemniee The creation of a complete sandstone fireplace with a cheminee 705 installed able to run as a slow combustion or a open fireplace |
| Full Brick Chimney |
|
This side elevation gives you a complete aspect of the traditional brick & masonry design open fire chhimney |
| Open Fireplace Brick faced with arch |
|
This chimney/opening was too shallow for a average size open fire convection box. So a brick arched face was added to acheive the depth of the firebox and bagged ready for painting. |
